Audio Ltd 2040 6-way RX Rack

Code: 
RK2040

Suitable for mounting up to 6 receivers the RK6 receiver rack is designed to work with a HotCam 2040 radio mic kit. You simply slot the RX into the unit which then not only mains powers the receivers, but also integrates its own aerials. Programming is done via the IR controllers (included with each kit) and a sleek built-in OLED display shows RF level, audio level, TX battery status and headphone monitoring and receivers are configured using a simple menu system on the same panel. All transmitters can be synchronised direct from the front panel using infra-red. The kit comes with both di-pole and Yagi aerials.

 

HotCam recommends the following with the RK6:

radio Mics: Audio Ltd 2040

Recorders: 788T

Mixers: AD0149 mixer, LS9, 

Technical specifications: 
Frequency Range
606-630MHz (CH38-40)
Number of diversity receivers
Up to 6
Active distribution amplifier bandwidth
24MHz
Powering
10 – 18 Volts DC via 4 pin XLR male socket
Plug
13A Mains Plug